Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units ,unit no. 19 - small shed near dome , unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. in lot abandoned condemned buildings consisting of released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar , gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian is sse (w) bvp, mode of delivery by weight, deliverable lot qty - 7.683 mt, loading by purchaser. note: 1. delivery of only ferrous material as mentioned qty. in lot will be given. purchaser is not allowed to take leftover ferrous material. 2. all wooden material including released door with chowkhat, released window with chowkhat, zaffry or any other wooden items are reclaimable and needed to submit to the custodian at reclaim area marked in mg workshop. 3. delivery of the material will be given only after submission of reclaimable material 4. purchaser needs to remove debris, bricks, masonary, rubble, ac sheets, manglore tiles from the dismantling sites untill ground is fully clear before taking the delivery. 5. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 6. after removing/ clearing the rcc/ brick masonary rubbish from the spot only, the delivery of iron material will be affected. 7. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 8. part delivery is not allowed. 9. any mg/bg rail lines or pway scrap with or without attachments lying under or beneath of building/sheds/structures are not deliverable. 10. purchaser need to first dismantle the all buildings/sheds/structures then only delivery will be permitted. fdp 50 days.
Tender For auction sale of depot non ferrous scrap - copper scrap comprising of copperconductorwire,burnt wire,bar, thimble,diesel locomotive parts with attached brass, strip , coil, tubes, brushes, nozzle, valve, plates and other similar of sort and size with or without minor ferrous, brass attachment if any [cloth godown ]
Tender For auction sale of 10 kva,1-ph cu wound,25 kva,1-ph cu wound,10 kva,3-ph cu wound,16 kva,3-ph cu wound,copper coil scrap with paper insulation,copperconductor/ wire scrap,burnt copper coil scrap with paper insulation,copper coil scrap with paper insulation,ab cable scrap,acsr conductor scrap,empty tank of transformer scrap,12 kv vcb empty tank scrap,scrap 12 kv vcb empty tank,burnt/ damaged un-economical distribution transformers scrap,5 mva
Tender For supply of materials for electrification work in different buildings of vadodara municipal corporation. (re-invite) - supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513/crca/ aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark/name 160v to 270v, power factor more than 0.95, thd cct led < 3000 k to 15%, 6500k, luminaire efficacy> 85 lumens/watt, led driver efficiency > 85 % (fitting required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown.) (a) tube light with integral driver(iii) 20 watts, surge 2kv,ip-20, conventional 4 feet. sor no.: 2-15-1. cat iii. make: philips/wipro/osram, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (1) 6 amp. sp one way switch. sor no.: 1-2-7. make: anchor woods/legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (2) 16 amp. sp one way switch. sor no.: 1-2-7. make: anchor woods/legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (3) 6/16amp. universal socket. sor no.: 1-2-7. make: anchor woods/legrand, providing following type of modular type accessories with necessary connection. as desired by engineer in charge. (4) 6 a socket. sor no.: 1-2-7. make: anchor woods/legrand, supplying upvc mini trunking (pvc casing-n-capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc/resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall/ceiling of following size. (1) 20 mm. sor no: 1-3-5, providing mains with 11 kv grade frls pvc insulated 151 marked. stranded copperconductorwire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 są mm copperconductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.(a) 2 wire 1.5 sq mm. sor no: 1-4-1(e). make polycab/kei/fimolex, providing mains with 1.1 kv grade fris pvc insulated isi marked stranded copperconductorwire in following type of pipe to be erected concealed in /flushed on wall/ceiling with 1.5 sq min copperconductor frls pvc insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe. (b) 2 wire 2.5 sq mm. sor no: 1-4-1(e). make: polycab/kei/finolex, supplying flesihle pvc insulated multi strand multi core 1.1 kv grade 151 marked copperwires of following size to be erected as directed.(e) 1.50 sq.mm 3 core round pvc sheathed sor no: 1-4-5. make: polycab/kei/finolex, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv. grade 1st marked copperwires of following size to be erected as directed.(b) 2.50 sq.mm 3 core round pvc sheathed. sor no 1-4-5.make: polycab/kei/finolex, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/metal/wooden box erected on wall/ceiling (1) one no single pole 6 a switch. sor no 1-6-1 make anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in pvc/metal/wooden box erected on wall/ceiling. (2) one no 3/5 pin 6 a socket. sor no.: 1-6-1.make: anchor/straco, providing following shockproof tissino type accessories erected on 3 mm thick pc (polycarbonate) sheet in metal/wooden hox erected on wall/ceiling. (5) one no single pole 16 a switch & one no 6/16 a universal pvc/socket combined. sor no.: 1-6-1.make: anchor/stracn 8828/1996 with isi mark cat iii. sor no: 3-10-1(8). make: l&t, legrand, providing 415 v mcb f
Tender For auction sale of depot ferrous scrap - 98050126: cond. & u/s. ms/ci/gi and scrap consisting of tmt rod, ms rod/angle/ channel/ pipe/ cut pieces of ms flat, tie bar , pipe fittings, tension rod, plate, ms door broken parts, ms stand, ms/gi nut, bolt, lock nut, clamp, gi parts, rope, mast parts, valve, cover, pump case, ms battery boxes, frames, ms boxes, ring, ct boxes, p/m covers,ms beaters angle different sizes, rack, ci components parts, fabricate rails, ms ladders, ms board, gate, grill gate, shutters, ms sheets , cut off angle , ms rod cut pieces, sflushing valve,train coach door and broken parts , trusses, square, sheet, rtu, atvm , relay panel box, nelco/ cgl box, loco parts, gears, cams, tap, beaters, bars, relay rack, pipe fittings, screw couplings, mesh door, ms door &window, cast iron pieces, ladder, grs box full and half, relay pannel box, ci components, coupling, hookes, augers, trolly, tension rod, fastners, pick axe, beaters, crow bars, post, lever,ms stand, slide cover tm case, turbo fan case, compressor valve, ms tank/cylinder,tool box, ci linked pots, chain, springs of sorts and sizes, damper, l c gate parts and gear, gear case, rotary key, grill, pulley, air filter, fencing, boiler tube, ms parts, winch wheel,loco liner, buffer, buffer case, buffer plunger, piston, piston cylinder, connecting rod, bearing case, cam shaft, pump case, turnout wheel, drum wheel, pta parts and such other similar items as is where is condition with/without trivial non ferrous attachment.note:(1|)if any stainless steel, non- ferrous, cable and other electrical items found in loose in the location to be handed over to custodian at the time of delivery. (2) machine and pantograph scraps available near the location not pertaining to the lot (3) crane/jcb loading permitted (4) cutting permiteed at time of delivery (5) electronic weighbridge capacity 30 mts only. hence purchaser should bring suitable vehicle so that the loaded weight should not exceed 28 mts at the time of delivery. locotion: in two location:1) opposite to w-51 & 52, side by of concrete road, 2)w-18 to w-23,near by witness shed of scrap yard/ssd/ptj